You Searched For: VACUUBRAND

Supplier: VACUUBRAND

Description: Rotary vane pump oil, B
Rotary vane pump oil, B has excellent viscosity characteristics and low vapour pressure. Its exceptional chemical resistance, more stable behaviour when pumping oxidants, acid and alkaline vapours, and the fact that it is better tolerated on contact with skin, sets this oil apart from conventional mineral oils. Even after continuous operation for several weeks and months, the oil ensures the pressure is maintained constantly. Used for priming all RE/RZ series pumps.

Supplier: VACUUBRAND

Description: For securing and mechanical pressing of O-ring seals. Aluminium or stainless steel, non rusting.

Supplier: VACUUBRAND

Description: Centering with external centering rings is effected on the external diameter of the small flange, the O-ring seal is pressed into an internal radius.

Supplier: VACUUBRAND

Description: These flanges are made from aluminium or plastic.

Supplier: VACUUBRAND

Description: Valves of the VK series are sturdy isolation devices for the rough and fine vacuum range. The VKE series uses stainless steel for the metal parts and fiberglass reinforced PTFE seatings.

Supplier: VACUUBRAND

Description: Vacuum filtration is one of the most common applications used for sample preparation in chemistry, microbiology, wastewater control and other analytical processes. VP 100 and VP 100 C diaphragm pumps offer a compact, high performance and easy to use solution which is perfect for both single and multiple filtrations.

Supplier: VACUUBRAND

Description: The DCP 3000 is an outstanding vacuum gauge with large illuminated display. The brand new VSP 3000 vacuum sensor is based on thermal conductivity (Pirani) and offers a wide measurement range from atmospheric pressure down to 10 to 3 mbar. The wetted parts are made of chemically resistant plastics (PBT, PUR) and alumina ceramics. It features a much better chemical resistance and ruggedness than conventional Pirani sensors with their fragile metallic spiral-wound filament. Simultaneous connection of up to eight vacuum sensors allows flexible measuring on the spot. The DCP 3000 communicates with external components via the VACUU·BUS® digital bus system. It is characterised by fully automatic configuration, unified plug connections and cable lengths of up to 30 m. In addition the DCP 3000 offers relative pressure measurements (VSK 3000 as reference) and a data logger feature for up to 32000 data values.

Supplier: VACUUBRAND

Description: These adapting centring rings for small flange connections with sealing ring made of FKM.

Supplier: VACUUBRAND

Description: Stainless steel, with FPM O-ring seal.

Supplier: VACUUBRAND

Description: The VS, VS C and VS B series valves are butterfly-type valves which offers very good conductance. The VS C series features a valve seal made of perfluorelastomer material (FFKM).

Supplier: VACUUBRAND

Description: The VacuuCenter BVC basic is designed for connection to an existing external vacuum source like a diaphragm pump or a vacuum network (e.g., VACUU·LAN®) and does not require electric power. The chemically resistant mechanical vacuum controller always ensures an optimal operating vacuum. The controller opens only when needed thus limiting the gas load on the vacuum source. The evaporation of collected liquid is minimised. The inlet tubing integrated in the bottle head reduces aerosol and foam formation and ensures a long service life of the hydrophobic protection filter. The aspiration system is available either as BVC basic with 4 litre PP bottle or as BVC basic G with 2 litre coated borosilicate glass bottle.

Catalog Number: (VACU20798142)

Supplier: VACUUBRAND

Description: Rotary vane pumps from VACUUBRAND offer great performance in a compact design. Even with the gas ballast open, they enable a very good ultimate vacuum. You also benefit from extended oil change and maintenance intervals thanks to optimized lubrication circuit and large usable oil volume.

UOM:

Sale

Supplier: VACUUBRAND

Description: These small flanges with weld stub short are made of stainless steel.

Supplier: VACUUBRAND

Description: Indium sealing for KF connections with stainless steel/aluminum centering rings (inside/outside) for small flange.

Supplier: VACUUBRAND

Description: These elbow pieces with small flanges are made of aluminium or stainless steel.

Supplier: VACUUBRAND

Description: T-pieces with small flanges KF made of aluminium or stainless steel.