You Searched For: LTE SCIENTIFIC

Supplier: LTE SCIENTIFIC

Description: Vacuum system for 40 L model (TCR/40/H1)*, For: Autoclaves, Touchclave

Supplier: LTE SCIENTIFIC

Description: The Touchclave®-R range of cylindrical-chambered autoclaves has been designed with a large range of standard features not seen before on this type of steriliser. These features ensure high productivity and performance, short cycle times, versatility and the reliability demanded by the busy laboratory.

Supplier: LTE SCIENTIFIC

Description: Range of ovens with choice of either natural convection or forced convection by means of a fan. U (Uni-program) models offer single temperature selection/control at the push of a button. Following a mains power failure, the controller will automatically re-start. M (Multi-program) models will allow up to eight multiple-step cycles to be stored in the memory. Selectable temperature ramping function allows controlled temperature rates to be programmed into a cycle, repeated for a specified number of times or held continuously until interrupted. Following a mains power failure, recovery options include cycle hold, start cycle from the beginning or re start cycle from point of interruption.

Supplier: LTE SCIENTIFIC

Description: ‘K’ series models are designed to operate using either a steam generator situated beneath the chamber, or via the customer's own direct steam supply. This arrangement maximises the usable chamber volume and provides a clean, unencumbered chamber, free from heaters and water.

Supplier: LTE SCIENTIFIC

Description: Oven

Supplier: LTE SCIENTIFIC

Description: Shelf for 150-litre models

Supplier: LTE SCIENTIFIC

Description: Simple compact cabinets, temperatures up to 85 °C can be obtained by means of an adjustable thermostat. All have fully adjustable shelves and toughened glass sliding doors. Models are available made either from polished stainless steel or from rust proofed steel finished in a textured, light grey, epoxy paint.

Supplier: LTE SCIENTIFIC

Description: Floor standing drying cabinets made of rust proofed steel, finished in textured epoxy with four adjustable reinforced chromium plated shelves. The sheathed heating elements, situated below a perforated base plate are vented either by natural convection or, for more rapid drying, via a top mounted extraction system, temperature control is by means of an energy regulator.

Supplier: LTE SCIENTIFIC

Description: The Swallow incubators are simple to operate and are controlled by means of a microprocessor system, offering precise temperature control, fast heat-up times and almost undetectable overshoot.

Supplier: LTE SCIENTIFIC

Description: Accessory for freeze dryer, 4-shelf unit, stainless steel, 220 mm Ø Faracrylic chamber, For: Lyotrap™ series freeze-dryers

Supplier: LTE SCIENTIFIC

Description: Conversion to 60 Hz electrical supply, vacuum models (factory fitted unit)

Catalog Number: (466-0080)

Supplier: LTE SCIENTIFIC

Description: This drying cabinet has a fine filter on the input side of the fan heater system, so washed equipment is not soiled by 'dirty' air entering the cabinet. A hydraulic thermostat allows control of the air temperature from 5 °C above ambient to 65 °C and permits controlled drying of heat sensitive substances including plastics. The front panel is fitted with a mains on / off switch, neon lamps to indicate 'mains on' and 'heaters on' and a temperature control knob.

UOM: 1 * 1 items

Sale

Supplier: LTE SCIENTIFIC

Description: The IP Series ™ of incubators is available in different sizes from 60 to 250 L. Fan circulated or natural convection options are avialable, plus there is a choice of PID control systems to suit most applications. Fast heat-up times, almost undetectable overshoot and superb accuracy table make the IP Series a class-leading product. These incorporate a manual reset over-temperature cut-out, in line with IEC1010-2-010.

Supplier: LTE SCIENTIFIC

Description: Shelves, Shelf for swallow oven 464-050, forced convection

Supplier: LTE SCIENTIFIC

Description: Oven, Large Capacity, Swallow™ 750, Capacity: 750 L, Convection type: Forced convection, Temperature range: 40…250 °C, Temperature fluctuation (time): ±0,2 °C, Temperature variation (spatial): ±5,0 °C, Max. load per shelf: ~15-20 kg, Shelves supplied (max.): 3 (19), Int. W×D×H: 1120×670×1000 mm, Ext. W×D×H: 1270×865×1270 mm

Supplier: LTE SCIENTIFIC

Description: The Lyotrap™ series are designed for the majority of laboratory applications with a range of accessories and options to handle samples in flasks, on trays, in vials and in ampoules. Three models are available to match requirements of scale and control from 3 to 5 kg of ice capacity in the condenser.