You Searched For: Valves

A variety of valves that can, depending on the product, be used to regulate pressure levels of liquid and gas in flow systems. These valves can be used for making connections between different lengths of tubing and connection points. Liquid and vacuum seals. A plethora of scenarios exist in which these valves can be used, each with a unique purpose and design for maximum safety and efficiency when in use, especially when pressure is of great concern.

A variety of valves that can, depending on the product, be used to regulate pressure levels of liquid and gas in flow systems. These valves can be used for making connections between different lengths of tubing and connection points. Liquid and vacuum seals. A plethora of scenarios exist in which these valves can be used, each with a unique purpose and design for maximum safety and efficiency when in use, especially when pressure is of great concern.


141  results were found

SearchResultCount:"141"

Sort Results

List View Easy View

Rate These Search Results

Supplier: UPCHURCH SCIENTIFIC
Description: For fine control of fluid flow rates, these valves can reduce outgoing flow. These needle valves are perfect for use with peristaltic pump fluid transfer applications, mass spectrometry and fraction collection. They can also be used to regulate gas flow in helium sparging lines and as a flow-dependent variable back pressure regulator.

Catalog Number: (229-7485)
Supplier: SEMADENI
Description: Three way ball valve with PP body and PTFE tips with total length of 65 mm.
UOM: 1 * 1 items


Supplier: OMNIFIT
Description: The high pressure manual rotary valves are made from PTFE with a PCTFE rotor with a bore size of 0,8 mm making them ideal for pressure applications up to 500 psi. They are available in four and five port versions. All ports are 1/4"-28 UNF flat-bottom and will accept any 1/4"-28 UNF male fitting. These valves are mountable using the pre-drilled M3 mounting holes.

Supplier: UPCHURCH SCIENTIFIC
Description: These biocompatible PEEK and perfluoroelastomer inline check valves are designed for applications where low flow path volume is critical, such as delivery to lab-on-a-chip, single-cell analysis and micro- or nano-LC post-column derivatisation.

Supplier: UPCHURCH SCIENTIFIC
Description: Back pressure regulator assemblies are designed to create incremental back pressures ranging from 5 to 1000 psi (0,3 to 69 bar). These biocompatible and stainless steel back pressure regulator assemblies are available complete with a replaceable, factory pre-set cartridge (except the 5 and 20 psi (0,3 to 1,4 bar versions).

Catalog Number: (560-0168)
Supplier: UPCHURCH SCIENTIFIC
Description: The 6-port medium pressure injection valves feature easy, external sample loop customisation. Simply clean-cut a piece of tubing that represents the volume of sample you wish to inject, taking into account the port-to-port volume of the valve.
UOM: 1 * 1 items


Supplier: SciLabware
Description: Designed for use in vacuum lines and fluid handling systems.

Catalog Number: (554-3155)
Supplier: UPCHURCH SCIENTIFIC
Description: The Quick-Stop Luer check valve assembly is specifically designed to provide inline Luer connect/disconnect convenience while avoiding spills. It is made from biocompatible PEEK with gold-plated stainless steel spring.
UOM: 1 * 1 items


Catalog Number: (UPCHP-450)
Supplier: UPCHURCH SCIENTIFIC
Description: Designed to accurately split and control the low flow stream of a single incoming supply.
UOM: 1 * 1 items


Supplier: OPTIMIZE TECHNOLOGIES
Description: A single OPTI-MAX® cartridge is interchangeable across multiple pump brands and can function in either the inlet or outlet position.

Catalog Number: (OMNI001113)
Supplier: OMNIFIT
Description: Valves are constructed from PTFE with a PCTFE rotor and have a 1,5 mm bore size. They accept tubing sizes between 0,5 and 4 mm Ext.Ø. and are pressure rated to 50 psi.
UOM: 1 * 1 items


Supplier: VICI JOUR RESEARCH
Description: This regulator installs on the detector drain line and prevents bubble formation in the flow cell during outgassing. It has an adjustable back pressure from 0 to 20 bar (15 to 300 psi) without disconnecting from the system. Other sizes available.

Catalog Number: (229-3591)
Supplier: Lenz Laborglas GmbH & CO.KG
Description: DURAN®, borosilicate glass, clear. Prevent pressure loss or backflow. Simple design, cannot be dismantled.
UOM: 1 * 1 items


Inquire for Price
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us on +353 1 88 22222.
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us on +353 1 88 22222
This product is marked as restricted and can only be purchased by approved Shipping Accounts. If you need further assistance, email VWR Regulatory Department at eurega_services@eu.vwr.com
-Additional Documentation May be needed to purchase this item. A VWR representative will contact you if needed.
This product has been blocked by your organisation. Please contact your purchasing department for more information.
The original product is no longer available. The replacement shown is available.
Product(s) marked with this symbol are discontinued - sold till end of stock. Alternatives may be available by searching with the VWR Catalog Number listed above. If you need further assistance, please call VWR Customer Service on +353 1 8822222.
129 - 141 of 141
no targeter for Bottom