SYLGARD® 184 Elastomer Kit

Supplier: DOW CORNING

Synonyms: Vinyl-terminated PDMSSiliconeCuring agentPolydimethylsiloxane

DOWC25100445EA 524 GBP
DOWC25100445
SYLGARD® 184 Elastomer Kit
SYLGARD® 184 Elastomer Kit

Dow silicone 10 to 1 encapsulants are supplied as two-part liquid component kits. When liquid components are thoroughly mixed, the mixture cures to a flexible elastomer, which is well suited for the protection of electrical/PCB system assembly applications. Dow silicone encapsulants cure without exotherm at a constant rate regardless of sectional thickness or degree of confinement.


  • Flowable
  • Room temperature and heat cure
  • Good dielectric properties
  • Rapid, versatile cure processing controlled by temperature
  • High transparency allows easy inspection of components


The 10 to 1 mix ratio these products are supplied in gives one latitude to tune the modulus and hardness for specific application needs and production lines. In most cases de-airing is not required.

Order Now

Specification Test Results

Viscosity (Base) 5100 cP
Viscosity (Mixed) 3500 cP
Thermal Conductivity 0,15 btu/hr ft °F
Specific Gravity (Cured) 1,03
Dielectric Strength 500 volts/mil
Volume Resistivity 2.9E+14 ohm*cm
Tensile Strength 980 psi
Refractive Index @ 589 nm 1.4118
Dissipation Factor at 100 Hz 0.00257
Dielectric Constant at 100 Hz 2.72

Learn more

About VWR

Avantor is a vertically integrated, global supplier of discovery-to-delivery solutions for...

Learn more About VWR